基于平均和峰值灰度加权的自动调光系统

介绍了在CCD高速电视测量仪系统中，利用电子快门和可变光阑有机结合，在运动控制卡控制下实现自动调光，扩大了调光的动态范围.采用了平均灰度和峰值灰度加权的办法来获取反馈信号，有效的解决不同背景下自调光系统的适应性.提出了基于二次函数的调光反馈量计算方法，提高了调光过程中的收敛速度，同时也保证了系统有较小的超调量.     

Influence of fluoride on f-f transitions of Eu in LiEuM2O8 (M=Mo, W)

The influence of fluoride on the luminescence of LiEuM₂O₈ (M=Mo, W) was studied. LiEuMo₂O₈ and LiEuW₂O₈ formed the whole range of solid solutions, which emitted intense red luminescence under the excitations by 395, 465 and 535 nm wavelengths. When doped with fluoride, the materials also formed solid solutions and the luminescent intensity was remarkably enhanced. The phosphor with optimized compositions in this system would be a promising red component for solid-state lighting devices based on GaN light-emitting diodes.     

Simultaneous determination of digoxin and digitoxin by micellar electrokinetic chromatography and application to drug formulations

A simple micellar electrokinetic chromatographic method is described for simultaneous determination of digoxin and digitoxin. The simultaneous analysis of digoxin and digitoxin was performed in Tris buffer (10 mM; pH 9) with 90 mM sodium dodecyl sulfate and 10% isopropyl alcohol as an anionic surfactant and organic modifier. Under these conditions, good separation with high efficiency is achieved in short analysis times. Several parameters affecting the separation of the drugs were studied, including the pH and concentrations of the Tris buffer and sodium dodecyl sulfate. The linear range of the method for the determination of digoxin and digitoxin was over 0.01–0.3 mg/mL; the detection limit (signal to noise ratio = 3; injection 3.5 kPa 3 s) was 4 and 6 μg/mL, respectively. Application of the proposed method to the determination of digoxin in commercial tablets and in injections proved to be feasible.     

Nutritional parameters of commercially available milk samples by FTIR and chemometric techniques

A chemometric study on the prediction of the main nutritional aspects of milk has been carried out by using fourier transform infrared spectroscopy (FTIR) attenuated total reflectance (ATR) measurements of commercially available milk samples of different types. Whole, semi and skimmed milks, enriched or not with calcium, vitamins or modified by alteration of lipid or sugar composition were considered. After evaluating different strategies for data acquisition and ATR cleaning between samples, hierarchical cluster analysis (HCA) was carried out for classification of samples in order to choose the calibration set. The prediction capabilities of partial least squares (PLS) data treatment were evaluated in order to obtain information about total fat, total protein, total carbohydrates (CH), calories and calcium. On using the mean square error of cross-validation and prediction as control variables, a critical evaluation were made about the calibration set to be used, the spectral range to be considered and the data treatment (PLS-1 or PLS-2) to be performed. By selecting a calibration set of 33 samples the properties of 48 samples were predicted with relative precision of triplicates of 0.062, 0.040 and 0.039% w/v for total fat, protein and carbohydrates, and 0.66 kcal/100 ml for calories, and 2.1 mg of Ca/100 ml. The mean difference (d_x−y) between predicted and actual values and standard deviation of mean differences (s_x−y), were of 0.06 (0.38), 0.03 (0.18) and −0.15 (0.41), being s_x−y values between brackets, for total fat, proteins and carbohydrates, 0.06 (3.8) kcal/100 ml for calories and −4.5 (9) mg/100 ml for calcium.The sensitivity and selectivity of the methodology developed were evaluated on terms of the net analyte signal. Selectivity factors ranging from 2 to 7.6% have been calculated for the five parameters considered.     

State-of-the-art of membrane bioreactors: Worldwide research and commercial applications in North America

Membrane bioreactor (MBR) technology is advancing rapidly around the world both in research and commercial applications. Despite the increasing number of studies and full-scale applications of MBR systems, directions and trends in academic research as well as commercial developments require further analysis. This paper aims to critically characterize and review worldwide academic research efforts in the area of MBRs as well as focus attention to commercial MBR applications in North America. A total of 339 research papers published in peer-reviewed international journals from 1991 to 2004 and a total of 258 full-scale MBR installations in North America were used as the database for the analysis provided in this paper. After a surge of MBR publications in 2002, research appears to have reached a plateau in the last 3 years using both submerged and external MBR units. Although much of the pioneering research occurred in Japan, France and the UK, countries such as South Korea, China and Germany have significantly contributed to the research pool in the last 5 years. The primary research focus has been on water filtration MBRs with limited growth in extractive and gas diffusion MBRs which still hold un-tapped potential. Fundamental aspects studied in academic research predominantly involve issues related to fouling, microbial characterization and optimizing operational performance. Research in North America presents a unique picture as a higher ratio of industrial wastewater treatment and side-stream MBR applications have been studied compared to other parts of the world. For MBR commercial application, the North America installations constitute about 11% of worldwide installations. Zenon occupies the majority of the MBR market in North America, whereas Kubota and Mitsubishi-Rayon have a larger number of installations in other parts of the world. Due to more stringent regulations and water reuse strategies, it is expected that a significant increase in MBR plant capacity and widening of application areas will occur in the future. Potential application areas include nitrate removal in drinking water treatment, removal of endocrine disrupting compounds from water and wastewater streams, enhancing bio-fuels production via membrane assisted fermentation and gas extraction and purification MBRs.     

SiO_2粒子对PMMA/SAN共混体系相分离行为的影响

采用小角激光光散射(SALLS)并结合动态流变学方法,考察了气相法二氧化硅(SiO2)粒子的加入对聚甲基丙烯酸甲酯/苯乙烯-丙烯腈无规共聚物(PMMA/SAN)共混体系相行为的影响,得到了添加SiO2粒子前后的相图,发现SiO2粒子对基体相行为的影响与基体的组成有关.对PMMA/SAN(60/40)体系,加入SiO2粒子后相分离温度上升,但并未改变相分离机理,仍为亚稳单相分解过程(spinodal decomposition,SD);而对于PMMA/SAN(30/70)体系,加入SiO2粒子后却降低了体系的相分离温度.该现象可能是SiO2粒子和基体组分界面间组成与PMMA/SAN共混物基体组成的差异造成的.     

基于扩展DALI总线的智能照明系统设计

针对大型商业照明场合存在的如组网不便、照明效果单一,能源利用率底的问题,设计了一套基于扩展DALI总线的商业智能照明系统,以实现系统的大面积组网和集中控制,获得丰富的照明效果,实现系统的绿色环保运行。测试系统搭建完成后,实现了管理人员对系统的集中管理和远程监控;系统可按照工作日程表、时间表自动运行;具有分区、分组、单灯、场景等多种控制方式,控制灵活,能达到较好的照明效果和节能要求,可满足多种商业照明需求。     

基于大功率LED扩展光源的均匀光斑光辐射模拟器设计

基于边缘光线原理和光学扩展量守恒思想,结合复合抛物面聚光器和轴对称自由曲面透镜,设计并研制了大功率发光二极管扩展光源的反射/折射准直器.运用Tracepro软件对系统进行光束追迹模拟仿真和实验,研制出均匀光斑的光辐射模拟器.模拟器输出发散角为±12°光束,测量距离出射面50cm处光屏的光斑,在尺寸为14cm×14cm的光照范围内,测得光斑水平方向中心线上的光度均匀度优于4.1%,竖直方向中心线上的光度均匀度优于3.8%.     

Conjugated polymer nanoparticles as fluorescence switch for selective cell imaging

Fluorescence switch plays a vital role in bioelectronics and bioimaging.Herein,we presented a new kind of facile electrostatic complex nanoparticles(ECNs)for fluorescence switching in cells and marking of individual cell.The ECNs were prepared by mixing positively charged poly(6-(2-(thiophen-3-yl)ethoxy)hexyl trimethylammonium bromide)(PT)and negatively charged diarylethene sodium salt(DAECOONa).DAE-COONa is a photoswitchable molecule which can be transformed between the ring-closed fo rm and ring-open form under the irradiation of UV or visible light.The closed-form of DAE-COONa can efficie ntly quench the fluorescence of PT through intermolecular energy transfer,while the open form of DAE-COONa does not influence the emission of PT.Thus,the fluorescence of ECNs can be modulated by light irradiation,and the ECNs with good fluorescence switching performance have been employed for fluorescence imaging and individual cell lighting up process successfully.We demonstrate that the electrostatic complex strategy provides a facile method to construct fluorescence switch fo r selective cell marking and imaging applications.     

Different approaches of impregnation for resolution of enantiomers of atenolol,propranolol and salbutamol using Cu(II)-l-amino acid complexes for ligand exchange on commercial thin layer chromatographic plates

Atenolol and propranolol (the β-blocking agents) and salbutamol (broncho- and vasodilator) were resolved into their enantiomers by adopting different modes of loading/impregnating the Cu(II) complexes of l-proline (l-Pro), l-phenylalanine (l-Phe), l-histidine (l-His), N,N-dimethyl-l-phenylalanine (N,N-Me₂-l-Phe), and l-tryptophan (l-Trp) on commercial precoated normal phase plates. The three different approaches were (A) using the Cu(II)-l-amino acid complex as chiral mobile phase additive, (B) ascending development of plain commercial plates in the solutions of Cu complex, and (C) using a solution of Cu(II) acetate as mobile phase additive for the commercial TLC plates impregnated with ascending development of plates in the solutions of amino acid. Spots were located using iodine vapour. The results obtained for the three methods have been compared for their efficiency and the issue of involvement of the Cu(II) cation for the best performance of the three methods has been discussed with respect to the same mobile phase. The detection limit is 0.18 μg for each enantiomer.